A Hub Motors is electrical motor coupled to wheels of vehicle. It is commonly used in E-bicycle. The most commonly used hub motor is Brushless DC motor owing to its high torque to weight ratio. The hub motor usually coupled to the wheels with speed controller in order to vary the speed of movement of Bicycle.
Connectors
An electronics Connectors is an electro-mechanical device whose purpose is to quickly and easily disconnect or interrupt a circuit path. Connectors come in a variety of sizes, shapes, complexities and quality levels.
Front Light
Front Light or Headlights are used to improve visibility of bicycle and its rider to other road users under the condition of poor light illumination. Another purpose is to illuminate roadways for rider to see the way ahead.
Brake Lever
Brake Levers are the small metal levers mounted on your handlebars that, when pulled, actuated the brakes to bring you to a halt. The E-Brake lever is a replacement for the regular brake lever and either cuts out the controller or engages regenerative braking in the controller when the lever is squeezed.
PAS
Pedal Assist Sensor The torque sensor or torque PAS is usually mounted on either the pedal crank or near the rear dropout and measures torque or simply the movement of the pedal during normal pedaling.
Throttle
The Throttle mode is similar to how a motorcycle or scotter operates. When the throttle is engaged the motor provides power and propels you and the bike forward. A Throttle allows you to pedal or just kick back and enjoy a free ride. Most Throttles can be fine tuned like a volume dial between low and full power.
